Do I need a licensed mold company in Oklahoma?

Oklahoma doesn't issue a mold license. OSDH says it has no authority over mold complaints, and the Construction Industries Board licenses trades like plumbing, electrical, HVAC and roofing, not mold work. Judge a contractor on experience, references, and a written scope.

Can I clean small mold spots myself?

EPA says an area under about 10 square feet is often a do-it-yourself job if the moisture is fixed and you don't have health concerns. CDC advises people with allergies, asthma, COPD or weakened immune systems to leave it to someone else.

Is this a mold removal company?

No. OKC Mold is a referral line. We pass your call or request to an independent contractor in the Oklahoma City area, and they quote and do the work.

Mold removal and remediation in Oklahoma City

Most mold calls in central Oklahoma start with water: a roof that took hail, a flash flood that pushed into the garage, a supply line under the sink that dripped for months, or an air handler that sweated all summer. Fix the water and the mold has nothing to live on. Skip that step and it comes back, no matter what gets sprayed on it. This site covers how that plays out in Oklahoma, Cleveland and Canadian counties, and puts you on the phone with an independent mold contractor who works your side of the metro, from Edmond down to Norman and from Yukon and Mustang across to Midwest City and Del City.

Start here: match what you're seeing to a page

What's going on	Where to read
Visible growth on drywall, trim, or a ceiling, more than a small patch	Mold remediation in Oklahoma City: containment, tear-out, and how to tell the job is finished
A musty smell with nothing visible, or you need paperwork for a sale or a landlord	Mold inspection and testing: when a lab sample earns its fee and when it doesn't
Water came in from outside: a storm, a creek, a backed-up drain	Mold after a flood and the first two days that matter most
Brown rings on the ceiling, damp insulation, or a stain that grew after a hailstorm	Hail, roof leaks and attic mold
Sweating vents, a wet closet behind the air handler, mildew every July	OKC summer humidity and mold
You rent and the landlord isn't fixing it	Mold in an Oklahoma rental: what the landlord-tenant act says
You're buying or selling a house	Mold when buying or selling a home in Oklahoma

Why this metro grows mold

Oklahoma City isn't swampy on paper. Will Rogers airport averages about 36 inches of rain a year under NOAA's 1991–2020 normals, with May the wettest month at a little over 5 inches (NCEI monthly normals). What makes trouble is how the water arrives. Spring storms dump inches in hours, hail opens roofs that nobody climbs up to check, and from June through August the normal dew point sits in the mid-60s around the clock (NCEI hourly normals). That humid air finds every cold duct, every closet against an air-conditioned wall, and every damp crawl space. Then winter dries everything out again, so a problem can look like it went away until the next wet season wakes it up.

Who licenses mold work in Oklahoma

Nobody, at the state level. The Oklahoma State Department of Health says it has no authority over mold complaints and that remediation is done by private companies (OSDH). The Oklahoma City-County Health Department says no state agency is responsible for mold complaints (OCCHD). The Construction Industries Board licenses electricians, plumbers, mechanical (HVAC) contractors, roofers, home inspectors and building inspectors, and none of those is a mold license (CIB).

That cuts both ways. Anyone can print "certified mold specialist" on a truck, so the questions you ask matter more than a card in a wallet. And if the fix involves a new roof, rerouted plumbing, or HVAC work, that part needs the matching CIB-licensed trade even though the mold cleanup itself doesn't.

Questions worth asking any mold contractor

Where is the water coming from, and who fixes that? Remediation without a moisture fix is a rerun waiting to happen.
How will you keep spores out of the rest of the house while you work? EPA's guidance calls for plastic containment once the moldy area passes about 10 square feet (EPA).
What gets cut out and thrown away, and what gets cleaned in place?
What does "done" look like, and will you put that in writing before you start?
Can I talk to a couple of recent customers? EPA's own advice is to check references and ask the contractor to follow EPA or ACGIH guidelines (EPA).

Prices are set by the contractor after they see the job. Get the number, and the scope it covers, before anyone starts tearing out drywall.

Questions people ask

Do I need a licensed mold company in Oklahoma?: Oklahoma doesn't issue a mold license. OSDH says it has no authority over mold complaints, and the Construction Industries Board licenses trades like plumbing, electrical, HVAC and roofing, not mold work. Judge a contractor on experience, references, and a written scope.
Can I clean small mold spots myself?: EPA says an area under about 10 square feet is often a do-it-yourself job if the moisture is fixed and you don't have health concerns. CDC advises people with allergies, asthma, COPD or weakened immune systems to leave it to someone else.
Is this a mold removal company?: No. OKC Mold is a referral line. We pass your call or request to an independent contractor in the Oklahoma City area, and they quote and do the work.

Talk to a mold contractor in the OKC metro

(405) 565-9932

This line is run by an independent referral service, not a mold company. Your call or request goes to a local contractor who quotes and bills you directly. Water still coming in? Shut it off or catch it first, then call.